Ceramics Research Today is a free monthly online journal that collates and summarizes the latest research about Ceramics, including details on dentistry, restoration, benefits.

Recycling of the product of thermal inertization of cement-asbestos for various industrial applications.

Gualtieri AF, Giacobbe C, Sardisco L, Saraceno M, Gualtieri ML, Lusvardi G, Cavenati C, Zanatto I

Dipartimento di Scienze della Terra, Università di Modena e R.E., Via S. Eufemia 19, I-41100 Modena, Italy. alessandro.gualtieri@unimore.it

Recycling of secondary raw materials is a priority of waste handling in the countries of the European community. A potentially important secondary raw material is the product of the thermal transformation of cement-asbestos, produced by prolonged annealing at 1200-1300 °C. The product is chemically comparable to a Mg-rich clinker. Previous work has assured the reliability of the transformation process. The current challenge is to find potential applications as secondary raw material. Recycling of thermally treated asbestos-containing material (named KRY·AS) in traditional ceramics has already been studied with successful results. The results presented here are the outcome of a long termed project started in 2005 and devoted to the recycling of this secondary raw materials in various industrial applications. KRY·AS can be added in medium-high percentages (10-40 wt%) to commercial mixtures for the production of clay bricks, rock-wool glasses for insulation as well as Ca-based frits and glass-ceramics for the production of ceramic tiles. The secondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-based pigment [Ca(3)Cr(2)(SiO(4))(3)] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO(5)]. The latter is especially interesting as a substitute for cadmium-based pigments. This work also shows that KRY·AS can replace standard fillers in polypropylene plastics without altering the properties of the final product. For each application, a description and relevant results are presented and discussed.

Published 8 November 2010 in Waste Manag, 31(1): 91-100.
Full-text of this article is available online (may require subscription).

© 2004-2012 Ceramics Research Today. All Rights Reserved.